Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

APC NetS. VL 42U 600mm Wide x

Forsiden Datamaskiner UPS APC NetS. VL 42U 600mm Wide x
APC NetS. VL 42U 600mm Wide x (AR2900)
APC NetS. VL 42U 600mm Wide x (AR2900)
APC NetS. VL 42U 600mm Wide x (AR2900)
APC NetS. VL 42U 600mm Wide x (AR2900)

APC NetS. VL 42U 600mm Wide x

  • Kapasitet 0VA
  • Produkt Tilbehør
17 976,-
22 470,- inkl. mva

NetShelter VL

NetShelter VL 42U 600mm Wide x 1070mm Deep Enclosure with Sides Black

Cost-effective IT enclosures with basic functionality and features.


Baying hardware, Doors, Key(s), Keyed-alike doors and side panels, Leveling feet, Roof, Side Panels


Net Weight: 105.62 KG
Maximum Height: 1970.00 mm
Maximum Width: 600.00 mm
Maximum Depth: 1070.00 mm
Shipping Weight: 121.25 KG
Shipping Height: 2118.00 mm
Shipping Width: 899.00 mm
Shipping Depth: 1219.00 mm
Weight Capacity (static load): 1052.27 KG
Weight Capacity (dynamic load): 802.27 KG
Rack Height: 42U
Color: Black


Regulatory Approvals: EIA-310-E
Standard Warranty: 5 year repair or replace
Standards: EIA-310-E
Environmental Compliance: RoHS,China RoHS,REACH: Contains No SVHCs

Features & Benefits

APC cooling, power distribution, and cable management products work seamlessly with the enclosures to provide a complete infrastructure support system.

Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment. The APC "Fits Like a Glove" money back guarantee provides peace of mind that all of your EIA-310-E compliant rack-mount equipment will physically fit in a NetShelter enclosure.

Large cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor.

No need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. APC has made it easy by handling the details and providing complete enclosures with single part numbers.

Perforated front and rear doors provide ample ventilation for rack-mount equipment.

Front door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple lift-off design.

The vertical mounting rails can be adjusted in 1/4 in (6.4 mm) increments covering virtually any mounting requirement for IT equipment. U positions are numbered front and back for rapid installation of equipment.

Split rear doors improve access and serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing.

Leveling feet can be quickly adjusted through the use of a screwdriver or drill, eliminating the need to reach underneath with a wrench.

Enclosures include pre-installed joining hardware to join enclosures in a row and provide additional stability to the enclosure.

The roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding.

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.